View Single Post
(#485)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 28,125
Join Date: Jan 2008
Default 01-16-2018, 04:29 PM

Quote:
Originally Posted by Marlinman
Wasq - not sure thanks for pointing that out...it felt fine but I see what you're talking about

New logs attached with slow speed CANbus enabled in new FW map 5. Still seeing throttle dip in middle of pull.....
The throttle behavior is normal. In the midrange you'd only be at 100% if boost is way below target. As boost reaches target it's mapped to around 70% in the midrange.

But what is a problem is the boost dip post spool. I think you'll need a user adjustable for spool mode smooth that out by remaining in spool until boost is closer to target.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote