Thread: Log Review
View Single Post
Dave @ BMS/Fuel-It!'s Avatar
Dave @ BMS/Fuel-It! Dave @ BMS/Fuel-It! is offline
Super Moderator
Posts: 7,617
Join Date: Apr 2014
Car: E92 335XI
Default 05-21-2019, 03:36 AM

Originally Posted by dtrelle
Hi Guys,

Im running map 2 with 94 octane, im FBO excluding a catback exhaust i also have a stage 2 bucket less fuel pump and just installed precision race works coil back i am experiencing limp mode more after i installed the coil pack these are the logs i took today and was also wondering if anyone has had any problems seating the coils onto the plugs, i have the updated coil packs
Triggered safety 2- afr lean

Bank 2 goes out of whack- based on log- looks like a hardware / sensor issue.

Could try an adaptation reset first, but Id replace

Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote