View Single Post
Steve @ BMS/Fuel-It!'s Avatar
Steve @ BMS/Fuel-It! Steve @ BMS/Fuel-It! is offline
Posts: 20,666
Join Date: Oct 2012
Car: 135i
Default 08-23-2021, 11:00 AM

Originally Posted by KillerBeeAirsoft
Itís fairly easy hookup. If your using the stock intercooler, you will need a 1/4 npt bit to make the hole for the injector for the charge pipe. (Passenger side) .
You can follow the diagram on the top of the thread. Also for the FSB controller, same instructions for the water/meth kit.
Only thing you have to usu caution with it the tapping of injector and making sure the pins are in the correct spot.
"you will need a 1/8" npt bit"

Click on our banner to visit our website!
Video of our Stage 2 LPFP upgrade installation.

BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways.
Reply With Quote