View Single Post
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Posts: 33,862
Join Date: Jan 2008
Default 04-13-2021, 09:17 AM

Originally Posted by Imperial_Ghost
Hello I am new here, I recently bought a 18 Stinger GT2 17k Miles. Of course I got it and immediately had to make some modifications.

I already have installed the BMS power package, BMS intercooler, muffler delete, and the EWG JB4 connectors.

I just received my CPI kit. My initial intentions were to run full e85, after reading some posts in this thread I now understand that I cant without some other things first.

Just to make sure before I can run full e85 I at least need a backend flash for my ecu.

Is there anything else I will need? I'm assuming I'll have to get some tuning done with Terry since there's no map in the JB4 for e85.

Please let me know what else I need to run e85.
E50 is the upper limit for now, on the factory flash.

Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote