View Single Post
(#2607)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 27,762
Join Date: Jan 2008
Default 04-03-2017, 04:31 PM

Can't remembr if I posted this info here. Just in case I didn't.


I've found there tends to be some confusion around the DWP setting with JB4 single turbo firmware. With the twin turbo firmware, this setting determines the wastegate position during off and very low boost, with 0 = 0% PWM/dutycycle and 100 = 100% PWM/dutycycle. The default setting here is 60.

Once you change to single turbo firmware, this value is adjusted to reflect the PWM/dutycycle spool mode. e.g. PWM/dutycycle is held at 100% (max) until boost is within a percentage of its target. A value of 60 means PWM is held at 100% until boost is at 60% of its target, 80 means PWM is held at 100% until boost is at 80% of its target, etc.

Higher values will improve spool behavior but also contribute to initial overshoot. In many instances that initial overshoot is desirable. But in others it is not. So set your DWP accordingly. It can also be changed on the fly in dash via menu10 should you want to play around with different settings on the track. In dash 0-5000rpm = 0-100.





Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote