N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   B58, B48 (https://www.n54tech.com/forums/forumdisplay.php?f=36)
-   -   2020 Supra Map 2 log to look at please (https://www.n54tech.com/forums/showthread.php?t=67029)

Cptnslo 11-20-2021 03:55 PM

2020 Supra Map 2 log to look at please
 
1 Attachment(s)
Can someone take a look at this. Only mods are a ******** (down pipe) and the jb4. I don’t initially put the map 3 on but got a bit of hesitation under first heavy throttle pull so I uploaded to map 2 and took this log at the drag strip. Car pulled fine but those boost numbers look way to high and I’d like it checked before I even consider going back to map 3. This is also on 93 octane.

Thank you!

Cannon @ BMS 11-22-2021 01:25 PM

Very odd settings. Please go back to default settings as seen on the link below and record another log. Lots of timing corrections.
https://www.n54tech.com/forums/showthread.php?t=31429

Cptnslo 11-22-2021 01:53 PM

Quote:

Originally Posted by Cannon @ BMS (Post )
Very odd settings. Please go back to default settings as seen on the link below and record another log. Lots of timing corrections.
https://www.n54tech.com/forums/showthread.php?t=31429

in regard to setting it to the default settings I saw mention using map 4 but the images show map 6 with those manual corrections. I just want to make sure I am using the correct ones.

Cannon @ BMS 11-22-2021 03:21 PM

Everything still applies on all maps, just not boost levels.

Cptnslo 11-22-2021 03:23 PM

Quote:

Originally Posted by Cannon @ BMS (Post )
Everything still applies on all maps, just not boost levels.

ive made the adjustments and I will get a log after work and upload it. Thank you!

Cptnslo 11-22-2021 04:24 PM

1 Attachment(s)
Here is the updated log. This was in 5th gear

Cannon @ BMS 11-22-2021 05:03 PM

Log was not taken properly. Please provide a WOT log from 2k rpm to redline on a private race track. Thanks

Cptnslo 11-22-2021 05:29 PM

1 Attachment(s)
Quote:

Originally Posted by Cannon @ BMS (Post )
Log was not taken properly. Please provide a WOT log from 2k rpm to redline on a private race track. Thanks

Hopefully this works better Iím battling traction issues in that gear but hopefully this is better.

Cptnslo 11-24-2021 07:30 PM

Bump

Steve @ BMS/Fuel-It! 11-26-2021 01:31 PM

Please take a proper log...start in 3rd gear at 2K rpms and GO WOT...you are not going WOT and you are running map 6 with boost targets at 0.:slap I'd suggest logging on map 4.

Cptnslo 11-26-2021 01:45 PM

1 Attachment(s)
Quote:

Originally Posted by Steve @ BMS/Fuel-It! (Post )
Please take a proper log...start in 3rd gear at 2K rpms and GO WOT...you are not going WOT and you are running map 6 with boost targets at 0.:slap I'd suggest logging on map 4.

Steve, I was told to run default settings per an earlier post and according to the link the default settings are what I have attached which is the zero boost targets and specifically lists map 6.

VipinLJ 11-26-2021 03:24 PM

Quote:

Originally Posted by Cptnslo (Post )
Steve, I was told to run default settings per an earlier post and according to the link the default settings are what I have attached which is the zero boost targets and specifically lists map 6.

Yes. Your settings are correct. But map 6 boost values are 0. The other settings affect all maps (not just map 6). When you change the map 6 boost values, that only affects map 6 (whereas duty and fuel bias and other values affect all values including map 6). So you set all the values to default (like in your picture) and then choose map 4 (or whichever map they ask you to log on). Don't choose map 6 since you haven't set boost (boost is 0 as per default values).

Steve @ BMS/Fuel-It! 11-29-2021 02:25 PM

Quote:

Originally Posted by VipinLJ (Post )
Yes. Your settings are correct. But map 6 boost values are 0. The other settings affect all maps (not just map 6). When you change the map 6 boost values, that only affects map 6 (whereas duty and fuel bias and other values affect all values including map 6). So you set all the values to default (like in your picture) and then choose map 4 (or whichever map they ask you to log on). Don't choose map 6 since you haven't set boost (boost is 0 as per default values).

Nailed it! :drinking:

StlSpeedn 12-15-2021 06:21 AM

Hello - Total Newb on this platform and just installed jb4 yesterday on my 2020 supra.

Question: Is it ok to run map 1 fully stock on 91 pump? Can I post my log here for someone to look at?

Cannon @ BMS 12-15-2021 11:30 AM

Quote:

Originally Posted by StlSpeedn (Post )
Hello - Total Newb on this platform and just installed jb4 yesterday on my 2020 supra.

Question: Is it ok to run map 1 fully stock on 91 pump? Can I post my log here for someone to look at?

Yes!


All times are GMT -7. The time now is 03:14 PM.


Copyright © 2007 - 2020, N54tech.com