JB4tech.com - International Turbo Tuning Discussion

JB4tech.com - International Turbo Tuning Discussion (https://www.jb4tech.com/forums/index.php)
-   N54 (https://www.jb4tech.com/forums/forumdisplay.php?f=3)
-   -   Installed DCI first timer, rear cone doesnít look like install pics (https://www.jb4tech.com/forums/showthread.php?t=67083)

ac_schnitzel 11-27-2021 10:19 PM

Installed DCI first timer, rear cone doesnít look like install pics
 
2 Attachment(s)
I went and installed the rear first instead of the front — it’s angled a bit down. Tube only fit in about 1/2inch into rear inlet but I think clamp is tight and sealing well. Front seems/looks fine.

Should I have any concern here?

Will note that my test drive was fine and the car isn’t throwing any codes. Induction noises sound great and car feels a little bit faster.

Steve @ BMS/Fuel-It! 11-29-2021 01:25 PM

As long as the clamp is secure and the intake can't be easily removed...you're good.


All times are GMT -7. The time now is 01:56 PM.


Copyright © 2007 - 2022, JB4tech.com