N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   Support & Log Review (https://www.n54tech.com/forums/forumdisplay.php?f=46)
-   -   B58 (no BEF) and new maps (https://www.n54tech.com/forums/showthread.php?t=59111)

T52 08-07-2019 08:16 AM

B58 (no BEF) and new maps
 
I recently upgraded my firmware from v11 to v13_1 on my '16 340i with JB4 and BMS Intake only. I run 93 octane pump gas and always used Map 2. Looking at the new Map guide would v11 Map 1 be similar to v13 Map 2, v11 Map 2 be similar to v13 Map 3 and v11 Map 3 be similar to Map 4?

JBoe 08-07-2019 11:44 PM

If you don't have BEF and FUD 6 enabled, the mapping is the same as V11. It only changes when you have V13+ and FUD 6 enabled. Stick with map 2... Same as before. Hope this helps to clarify.

T52 08-08-2019 06:30 AM

Thanks for the explanation. I was confused because I was referring to the map guide shown for v13 Back End Flash Maps. My thinking was since I upgraded to that version firmware I should use that map guide. So even though I have v13 firmware without FUD 6 enabled the JB4 is using v11 map guide.

JBoe 08-08-2019 07:17 AM

That's correct. I recently asked this in the BEF, or Firmware/Settings thread and Terry confirmed. It was just a week or so ago. If you want, search my post history and you'll find it.


All times are GMT -7. The time now is 07:36 PM.


Copyright 2007 - 2019, N54tech.com