N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   Lexus, Maserati, Alfa, Jeep, Diesel, McLaren, and other new applications (https://www.n54tech.com/forums/forumdisplay.php?f=42)
-   -   JB4 for Alfa Romeo Giulia (https://www.n54tech.com/forums/showthread.php?t=55457)

Terry @ BMS 10-12-2018 09:32 AM

JB4 for Alfa Romeo Giulia
 
*** We're going to use this thread as the general Alfa Romeo Giulia JB4 informational thread including posting the install guide, mapping guide, software, firmware updates as we release them, logs, and general discussion. ***

Order Here!

Use subject to terms and conditions posted at http://www.burgertuning.com/terms.html

THIS PART IS LEGAL FOR USE ONLY IN COMPETITION RACING VEHICLES AS DEFINED UNDER CALIFORNIA LAW, AND IS NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE. California law defines a "racing vehicle" as "a competition vehicle not used on public highways." (Calif. Health & Safety Code 39048) This part may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event. Competition-only motor vehicles may not be driven to a racing event on a public highway and must be transported on a trailer or other carrier. USE OF THIS PART IN ANY OTHER VEHICLE MAY SUBJECT YOU TO FINES AND PENALTIES FOR VIOLATION OF FEDERAL AND/OR STATE LAW, WILL VOID YOUR WARRANTY FROM BURGER MOTORSPORTS, INC, AND CAN VOID YOUR VEHICLE'S WARRANTY. It is your responsibility to comply with all applicable federal and state laws relating to use of this part, and Burger Motorsports, Inc hereby disclaims any liability resulting from the failure to use this part in compliance with all applicable federal and state laws.

By default the JB4 ships on map1. For higher boost map, logging, firmware updates, and other features, you'll need a JB4 Mobile adapter for wireless connection to your phone or a BMS data cable for wired connection to a laptop.

JB4 Mobile Smart Phone wireless connection directions Click here.
BMS data cable hard wired directions Click here.

Installation guide Click Here

Map guide as of v3 firmware (selected via JB4 Mobile/laptop interface. Map1 is the default map)

Map 0: JB4 disabled
Map 1: 5psi over stock tapering to 2psi at redline.
Map 2: 5psi over stock tapering to 3psi at redline
Map 3: Unassigned
Map 4: Unassigned
Map 5: Unassigned
Map 6: Unassigned
Map 7: Unassigned
Map 8: VALET / Low Boost map


JB4_ALFA_3:

1) Adjusted IAT scaling, not sure if it's fully accurate yet but much closer.
2) Moved VALET map to map8, minor revisions to map1 and map2.
T1) Minor change to IAT scaling to try to get it more accurate.

JB4_ALFA_2:

1) Enabled CANbus engine allow the JB4 to now access the full suite of engine data including engine speed, ignition advance, air/fuel ratio, fuel trims, throttle & pedal position, engine temperatures, fuel pressure, and more. Requires OBDII cable to be attached to JB4. See install video below.

JB4_ALFA_1:

1) Fixed bug with false alarm fault code related to IAT/TMAP sensor.






How to update firmware:

For firmware updates if having issues we suggest you turn off WiFi, change upload timeout to 25, and set your phone next to JB4 box under the hood.

Download firmware using the new JB4 Mobile firmware database or externally by clicking this link.


Payam @ BMS 10-15-2018 08:33 AM

Ready for purchase, will have some dyno numbers soon.

1/8 mile testing gained +3mph with just map 1, about 30whp gain.

http://www.burgertuning.com/alfa_rom...nce_tuner.html

stealth_alfa 10-18-2018 10:02 AM

Just purchased it on Monday and came in today! I'm new to JB4s so I apologize for my ignorance but is the best way to produce the most power out of this is with e85?

Terry @ BMS 10-19-2018 09:33 AM

It's still a new product. For now I'd just install it, run map1, and mix in 2-3 gallons of E85. As we get more of them out there we'll provide higher power map suggestions. :)

Payam @ BMS 10-22-2018 08:49 AM

Quote:

Originally Posted by stealth_alfa (Post )
Just purchased it on Monday and came in today! I'm new to JB4s so I apologize for my ignorance but is the best way to produce the most power out of this is with e85?

Did you install it yet?

CableMan67 10-25-2018 03:00 PM

Looking to get JB4 for my 2018 Alfa Romeo Stelvio Ti, any numbers yet? Also does this Giulia intake fit the Stevlio? When will it be available?

Payam @ BMS 10-25-2018 03:22 PM

Quote:

Originally Posted by CableMan67 (Post )
Looking to get JB4 for my 2018 Alfa Romeo Stelvio Ti, any numbers yet? Also does this Giulia intake fit the Stevlio? When will it be available?

Stelvio and Giulia should be identical in Jb4 and Intake system. Jb4 is ready now, Intake system will be out in a month.

If you can upload a picture of your engine bay that would be the best. You can also check our install guide!

stealth_alfa 10-25-2018 04:14 PM

Quote:

Originally Posted by Payam @ BMS (Post )
Did you install it yet?

Not yet, unfortunately, my car is being fixed in a body shop for some minor damage but I will install it and attempt to make a custom map for it on map 6, with a ******** too that is currently being fabricated for me.

stealth_alfa 10-25-2018 04:15 PM

Quote:

Originally Posted by stealth_alfa (Post )
Not yet, unfortunately, my car is being fixed in a body shop for some minor damage but I will install it and attempt to make a custom map for it on map 6, with a ******** too that is currently being fabricated for me.

down pipe *

CableMan67 10-25-2018 06:17 PM

1 Attachment(s)
Quote:

Originally Posted by Payam @ BMS (Post )
Stelvio and Giulia should be identical in Jb4 and Intake system. Jb4 is ready now, Intake system will be out in a month.

If you can upload a picture of your engine bay that would be the best. You can also check our install guide!

Here's a picture on my Stelvio engine bay, looks like intake from Giulia should fit from the video.
Do you have price?

not.qv 10-26-2018 09:23 AM

hey! cool to see new products in the market.
are you guys only putting one map out??

...how long till we can get some sound tuning?
I've been wanting gunshots or at least a good burble since day one.

Martyn10 10-30-2018 11:40 AM

Quote:

Originally Posted by Terry @ BMS (Post )
It's still a new product. For now I'd just install it, run map1, and mix in 2-3 gallons of E85. As we get more of them out there we'll provide higher power map suggestions. :)

I have a question. I have already fitted an EC V2 intake system on my Giulia. Does this pose any issues with adding the JB4 tune with that already in place? Would I still get a 30whp power increase? Does the JB4 map 1 change the max RPM?

Payam @ BMS 10-30-2018 01:29 PM

Quote:

Originally Posted by Martyn10 (Post )
I have a question. I have already fitted an EC V2 intake system on my Giulia. Does this pose any issues with adding the JB4 tune with that already in place? Would I still get a 30whp power increase? Does the JB4 map 1 change the max RPM?

Not at all, the intake would only help you get more gains! Jb4 does not change max RPM.

CableMan67 11-07-2018 07:35 AM

Any update on how this tune is working and/or numbers?
Also is the intake getting released this month, next month?

Payam @ BMS 11-07-2018 05:40 PM

Quote:

Originally Posted by CableMan67 (Post )
Any update on how this tune is working and/or numbers?
Also is the intake getting released this month, next month?

We should have some dyno numbers soon actually. We have lots of positive feedback actually already. Traction is a huge issue for the RWD :burnrubber: so we know it's making power :)

Intake should be released end of month.

CableMan67 11-26-2018 01:38 PM

Quote:

Originally Posted by Payam @ BMS (Post )
We should have some dyno numbers soon actually. We have lots of positive feedback actually already. Traction is a huge issue for the RWD :burnrubber: so we know it's making power :)

Intake should be released end of month.

Any update when intake for Giulia/Stelvio will be available to order?

turbologist 12-08-2018 02:09 PM

Hey Terry, any updates on working out the bugs and such?

What’s the feedback you’ve been getting?

Terry @ BMS 12-08-2018 07:31 PM

We've gotten a few out, waiting for more customer logs and feedback to come in. :)

turbologist 12-08-2018 10:13 PM

Quote:

Originally Posted by Terry @ BMS (Post )
We've gotten a few out, waiting for more customer logs and feedback to come in. :)

Sounds good my man... Looking forward to some positive news.

If you need another guinea pig, pm/ email me...

CableMan67 01-03-2019 08:09 PM

Quote:

Originally Posted by Payam @ BMS (Post )

Intake should be released end of month.

Payam,
Any update on the release of the intake?

Terry @ BMS 01-14-2019 04:31 PM

Quote:

Originally Posted by CableMan67 (Post )
Payam,
Any update on the release of the intake?

Intake is released! :drinking:

Alfa Romeo 2.0T - BurgerTuning.com

Terry @ BMS 01-14-2019 04:32 PM

Quote:

Originally Posted by turbologist (Post )
Sounds good my man... Looking forward to some positive news.

If you need another guinea pig, pm/ email me...

Still early days, couple reports of a startup throttle code we need to address. The more testers the better. Just engage us via email if any issues come up so we can work with you on the firmware.

Payam @ BMS 01-30-2019 01:52 PM

Sold a few already, where you guys at? Post some sound clips and pictures :)

http://www.burgertuning.com/images/A...Intake_bms.jpg

http://www.burgertuning.com/images/A...meo-Intake.jpg

Lifted07Duramax 02-02-2019 06:52 PM

dyno numbers?

Terry @ BMS 02-02-2019 06:59 PM

Don't have any for the intake, at least not yet.

If anyone has time to test a JB4 firmware update email me, I have an idea that may get CANbus working. :)


All times are GMT -7. The time now is 12:41 AM.


Copyright © 2007 - 2020, N54tech.com