N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   Suspension and Brakes (https://www.n54tech.com/forums/forumdisplay.php?f=29)
-   -   Cutting off spring (https://www.n54tech.com/forums/showthread.php?t=52513)

blackhat75 04-09-2018 08:35 AM

Cutting off spring
 
If I wanted to speed up the lowering process for the front only and didn't plan to save/sell the factory springs, could I just cut the stock springs while on the strut to release the compression to remove the strut hat+bolts? I have my spring compressor to reinstall the H+R's later but to shave a few seconds off the removal time, is this a possibility? Thanks.

P.S. We only get one sunny day this week and I'm strapped for time to get it in and out of the garage before the rains come back.

Jason @ BMS 04-12-2018 10:59 PM

Yes, you can the factory spring with a grinder but it may not save that much time.


All times are GMT -7. The time now is 12:59 AM.


Copyright 2007 - 2020, N54tech.com