N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   Lexus, Maserati, Alfa, Jeep, Diesel, McLaren, and other new applications (https://www.n54tech.com/forums/forumdisplay.php?f=42)
-   -   JB4 for Lexus IS 200i 300i (https://www.n54tech.com/forums/showthread.php?t=35256)

Terry @ BMS 11-25-2015 06:05 PM

JB4 for Lexus IS 200i 300i
 
3 Attachment(s)
Use subject to terms and conditions posted at http://www.burgertuning.com/terms.html

THIS PART IS LEGAL FOR USE ONLY IN COMPETITION RACING VEHICLES AS DEFINED UNDER CALIFORNIA LAW, AND IS NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE. California law defines a "racing vehicle" as "a competition vehicle not used on public highways." (Calif. Health & Safety Code 39048) This part may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event. Competition-only motor vehicles may not be driven to a racing event on a public highway and must be transported on a trailer or other carrier. USE OF THIS PART IN ANY OTHER VEHICLE MAY SUBJECT YOU TO FINES AND PENALTIES FOR VIOLATION OF FEDERAL AND/OR STATE LAW, WILL VOID YOUR WARRANTY FROM BURGER MOTORSPORTS, INC, AND CAN VOID YOUR VEHICLE'S WARRANTY. It is your responsibility to comply with all applicable federal and state laws relating to use of this part, and Burger Motorsports, Inc hereby disclaims any liability resulting from the failure to use this part in compliance with all applicable federal and state laws.


This will be the primary thread for all Lexus Stage1 & JB4 tuning!

JB4 Mobile Smart Phone wireless connection directions Click here
BMS data cable hard wired software Click here
BMS data cable hard wired directions Click here

JB4 Map Guide:

Map0: JB4 disabled, stock tuning
Map1: 4psi over stock peak
Map2: 5psi over stock peak
... more to come via free firmware updates!

Newguy123 11-25-2015 09:46 PM

Lean queen. Nice work

shatty 06-04-2016 08:15 PM

I have a 16 Nx200t...Sign me up up testing!!! I will def use my truck as a mule. I don't care if it blows up! LOL And also as far as I know, we can put up to E20 in the tank. Says it on a label on the gas door

Cmunger17 09-18-2016 11:03 AM

Any news as to when this will be available?

E46CT 10-06-2016 07:49 AM

Was looking at the dyno sheet and your post, Terry and you say the car pushes 8 psi stock. I am wondering why the Lexus documentation (including being confirmed by the factory boost gauge on the car) says:

"Target Boost Pressure – The intake air pressure that the ECM is trying to receive from the turbocharger system. This data list item is labeled in absolute PSI reading. Therefore the technicians will see a target boost of close to 15 PSI when the vehicle is at idle. This is a normal condition, because atmospheric pressure is close to 15 PSI absolute. During boost conditions under WOT, the target boost will reach approximately 30 PSI, which means the ECM is requesting the maximum boost pressure of 17.4 PSI from the turbocharger system.

You guys are the experts so maybe I'm interpreting your post wrong. Is 8 psi an average throughout all gears or?

Here is the Lexus manual: See page 28 of the PDF http://www.natef.org/NATEF/media/NAT...exus-Turbo.pdf

Just out of curiosity :) I'm following this closely and can't wait for you guys to see what you come up with.

E46CT 03-27-2017 11:07 AM

is this tune nearing completion or already set in stone and just waiting for hardware stuff now?

Terry @ BMS 03-27-2017 06:07 PM

I have the parts to make another 5 test units but just have not had the time to get to it. Hopefully later this week.

E46CT 03-28-2017 08:36 AM

Quote:

Originally Posted by Terry @ BMS (Post )
I have the parts to make another 5 test units but just have not had the time to get it it. Hopefully later this week.

Thanks. I bought one of your test units from someone. I receive it tomorrow. :burnrubber:

E46CT 03-29-2017 09:46 AM

Terry installed test unit on car last night. Don't feel any difference at all. confirmed map 1 is selected by connecting to PC. do i have to let the car adjust to it? granted i havent driven much. maybe less than 25 miles so far. just wondering if the box works instantly or requires adaptation or something along those lines. thanks! and hope it's ok to ask that question in this thread.

Terry @ BMS 03-29-2017 02:48 PM

I don't know what you have exactly or how it was setup, so might be best to discuss with whoever you got it from. If you need addl help you'd have to email in.

E46CT 03-29-2017 03:55 PM

Cool no prob. I'm just going to drive it around. I think i feel it getting stronger. It's a stage 1 box on a stock car.

mike@x-ph.com 05-25-2017 03:59 PM

Nice!

Terry @ BMS 07-09-2017 09:08 AM

Finally managed to get a handful more connectors, will throw together 10 BETA systems next week. :)

Terry @ BMS 07-19-2017 02:40 PM

Was only able to put together three systems. Thought we got more of one of the connectors than we did. :( Anyway, they are $379 + $10 USA shipping. If you want one just paypal to orders@burgertuning.com and I'll update this post once the three we have right now are gone.

Terry @ BMS 07-19-2017 03:05 PM

No plays for anything beyond Stage1 for the platform at this time, and of course the intake which we released last year.

Installation is similar to Q50 Stage1: http://burgertuning.com/instructions/Q50_Stage1.pdf

Terry @ BMS 07-19-2017 04:44 PM

Thanks, we'll get it out tomorrow.

Terry @ BMS 07-19-2017 07:55 PM

What is the 30% throttle limitation?

Terry @ BMS 07-19-2017 08:45 PM

I have not noticed it on our test car beyond the lack of displacement. I don't imagine the Stage1 will make any difference, but we can certainly look in to it!

Terry @ BMS 08-09-2017 09:14 AM

Got a batch of connectors in so we can throw some more harnesses together later this week. Not much feedback yet though from the 3 systems shipped out a couple weeks ago....

E46CT 08-09-2017 03:39 PM

Quote:

Originally Posted by Terry @ BMS (Post )
I have not noticed it on our test car beyond the lack of displacement. I don't imagine the Stage1 will make any difference, but we can certainly look in to it!

Apparently a tuning company discovered through their data log that the throttle plate on the 200t is limited to 30% opening even when floored, up until 3k RPM when the ECU allows it to fully open.

The theory is this is to handicap the car so it doesn't step on the IS350's toes since that car only makes 306hp.


All times are GMT -7. The time now is 01:41 PM.


Copyright 2007 - 2020, N54tech.com