N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   Lexus, Maserati, Alfa, Jeep, Diesel, McLaren, and other new applications (https://www.n54tech.com/forums/forumdisplay.php?f=42)
-   -   2016 C7 Z06 (https://www.n54tech.com/forums/showthread.php?t=42698)

Terry @ BMS 05-16-2017 10:18 AM

1 Attachment(s)
Had a customer send in some dyno files on a stock 2015 A8, 91 crap-tane, stock filter vs. BMS drop in.

Mike_L 05-16-2017 12:34 PM

30hp, 25 lb/ft from a filter? What the hell is GM putting in there from the factory??!!

Terry @ BMS 05-16-2017 12:51 PM

Only 15hp of that is from the higher flow of the filter. The rest is from the leaner air/fuel ratio since the filter does some minor MAF rescaling. Basically, it's the same effect you get with all the Z06 intakes. Only it's $90 and looks stock. :)

Terry @ BMS 07-03-2019 04:44 PM

1 Attachment(s)
Due to a lot of requests we ordered in a new GM high performance airbox and are working on optimizing a new drop in filter for it, like our current Z06 drop in filter. At quick glance we'll be able to make the opening larger, filter longer, with more pleats, and less cage structure for higher flow! w00t!

Terry @ BMS 09-24-2019 04:52 PM

Model of our filter for the GM airbox in testing now! Dyno results here: BMS Drop in for Corvette C7 GM Performance Cold Air Intake Dyno Testing - N54Tech.com - International Turbo Racing Discussion

Newguy123 04-02-2020 08:03 AM

Good read and great data, so from the sounds of it I should take the roto fab intake off the zl1 go back to stock intake with your drop in maybe run some e20 and see if I get any codes. Maybe I’ll hit up Jesse and do a comparison on his dyno using 91 with this roto intake vs your drop in (if airbox is same as your c8) and then try dumping a few gallons of e85 in and repeat on the stock map.

All times are GMT -7. The time now is 11:15 PM.

Copyright 2007 - 2020, N54tech.com