N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   Honda Civic, Accord 1.5L and 2.0L Turbo (https://www.n54tech.com/forums/forumdisplay.php?f=40)
-   -   MAF Size Differences? (https://www.n54tech.com/forums/showthread.php?t=62383)

Tabooo 06-20-2020 08:53 AM

MAF Size Differences?
 
Hi!

I had a question about the MAF housing for the Civic intake from BMS.

Does anyone know if there is a difference in the size of the hole for the MAF between the Civic Si and the Non-Si Civics?

I'm asking because I bought the factory calibration intake for Civic Si's, but there is no way I can fit the MAF into the housing unless I bored the hole out more or destroyed my MAF.

Thanks for the input!

Terry @ BMS 06-20-2020 07:33 PM

Yes they are different physical sizes! Maybe got the wrong one? Email us if you need help with it.

Tabooo 06-20-2020 08:26 PM

Sounds good! I'm in the process of emailing support, but when I asked before about different sizes, I was told that the Civic MAF holes were all the same size. I was able to send a picture though showing that the Si MAF will definitely not fit in the MAF housing I received. Hopefully it will be solved early next week and I can get the proper housing. I'm excited to hear that turbo!

Terry @ BMS 06-22-2020 09:03 AM

The MAF hole is the main difference between them IIRC.

Tabooo 06-22-2020 09:08 AM

Yeah, everything else fit like a dream! The stock intake tube fit really nicely and the included filter fit on well also. It was just when I was about to finish up and put the MAF in was when I noticed that it didn't fit.


All times are GMT -7. The time now is 02:45 AM.


Copyright 2007 - 2020, N54tech.com