N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   N20, N26 (https://www.n54tech.com/forums/forumdisplay.php?f=5)
-   -   Will this work on N20 EWG? (https://www.n54tech.com/forums/showthread.php?t=59605)

dannytanky 09-20-2019 08:48 AM

Will this work on N20 EWG?
 
1 Attachment(s)
Picked this up from a F10 520i owner. I have a few questions which I hope someone could help with:

1. Will this work on my F30 328i N20 with EWG?
2. Can this use the latest firmware? If yes, which one should I flash to? N20_OBDII_PWG_6.hex or N20_OBDII_EWG_6.hex?
3. Can this work with the latest revision of the JB4 connect kit?
4. The harness comes with 4 pairs of connector: rainbow, brown, black and blue. I know for EWG I can skip the blue connectors. How about the black wire connectors?
5. The harness also comes with a ground cable (and I think also a red power cable). Do I need to hook them up? If yes, I assume black to shock tower nut and red to +ve terminal?
6. Anything else I need to make it work?

Attached is a picture my JB4 for reference.

Sorry for all these questions. Really want this to work for my car.

Payam @ BMS 09-20-2019 11:35 AM

No, this is PWG.

dannytanky 09-20-2019 02:56 PM

Deleted

Ando @ BMS 09-23-2019 02:56 PM

DON'T load the EWG firmware as the JB4 is PWG.
You can install as-is and use map 1 and 2 with the PWG firmware on it.
You will just skip the boost solenoid connector and install the rest


All times are GMT -7. The time now is 11:31 AM.


Copyright 2007 - 2020, N54tech.com