N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   Support & Log Review (https://www.n54tech.com/forums/forumdisplay.php?f=47)
-   -   Data logs M4 (https://www.n54tech.com/forums/showthread.php?t=57849)

pdcnc 05-05-2019 08:07 AM

Data logs M4
 
2 Attachment(s)
My first datalogs with Jb4 M4.
What do you think

Terry @ BMS 05-05-2019 09:14 AM

1 Attachment(s)
Looks normal to me! If the car is flashed set FUD.6 on.

pdcnc 05-05-2019 10:13 AM

After more than a year of just MHD I am happy to return to JB4. You are still the best customer service I know. With regard to the fan, disconnect the battery one hour and when turning on everything was working normally (perfect). I went and made the logs that I put here.
I just went to turn it on and it came back the problem
I have MHD stage 0 (stock power)
I would like to try a Jb4 flash race. but I need to fix the fan and water pump problem.
Un millón de gracias Terry

Terry @ BMS 05-05-2019 05:32 PM

Maybe loading the flash will fix them? Could be an issue with the flash tables for those.

pdcnc 05-06-2019 09:17 AM

2 Attachment(s)
It is correct Terry charge the flash and fix. Here I put a couple of datalogs to see your opinion. I expected more psi.

Terry @ BMS 05-06-2019 09:48 AM

Set FUD.6 on so the JB4 knows you are flashed. Which map was flashed?

pdcnc 05-06-2019 10:30 AM

2 Attachment(s)
Yes, FUD is in 6 and install flash JB4-S55-RACE-13

pdcnc 05-06-2019 10:34 AM

Sorry for the size, I did not know they would come out that big.

pdcnc 05-06-2019 10:39 AM

1 Attachment(s)
I was missing this one.

Terry @ BMS 05-06-2019 10:44 AM

That is not correct. Bit6 on. All others off. Also don't need photos of settings, they are in the CSV logs.

pdcnc 05-06-2019 10:56 AM

Only if I put a value of 64 I activate the one equipped with back end flash map

Terry @ BMS 05-06-2019 11:30 AM

OK good, that works if you prefer to enter it manually rather than just select bit#6 on.

pdcnc 05-06-2019 11:37 AM

Now I turn it on and the fan is turned on too.

pdcnc 05-06-2019 11:47 AM

When installing Jb4, install all the sensors. Is this correct?

Terry @ BMS 05-06-2019 11:52 AM

Regarding your fan, what is the water temperature in the JB4 app? And your IAT?

Yes you can connect all sensor connections.

pdcnc 05-06-2019 12:50 PM

105 oil (221 F ) - 100 water (212 F).
I just tried it with 70 and 72 degrees Celsius and the same goes on the fan.
There are two stock MHD map stg 0. One that removes the MHD and the other that leaves it. I use the one that leaves it. It is right ?

Terry @ BMS 05-06-2019 01:40 PM

For now let's leave the fan as is, maybe you are changing the turn on temp when flashing or something. And focus on the more important issue. Performance. :)

pdcnc 05-06-2019 03:36 PM

3 Attachment(s)
Now yes, it seems that everything is very good.

pdcnc 05-09-2019 03:58 PM

WGDC/FF/IGN
 
1 Attachment(s)
Hi Terry, what do you think about this log, can I continue playing with FF?
without forcing the turbos. Thank you

Terry @ BMS 05-09-2019 04:56 PM

Boost is generally on target so I don't see any changes needed.


All times are GMT -7. The time now is 04:55 PM.


Copyright © 2007 - 2019, N54tech.com