N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   N63, N63TU (https://www.n54tech.com/forums/forumdisplay.php?f=57)
-   -   N63 using ms109 map 6 setup (https://www.n54tech.com/forums/showthread.php?t=57160)

Hb_z 03-12-2019 06:54 PM

N63 using ms109 map 6 setup
 
1 Attachment(s)
Hi guys i want to reach 20psi or more on my n63 can you help me with map 6 setup.


P.s I uploaded a log of map 2 running ron 95.

BMRDude 04-22-2019 10:09 PM

What help do you need?

Your timing looks good, but you have pretty large boost differences between banks to sort first.

Hb_z 04-23-2019 03:06 AM

How much boost do i put on each rpm and the max psi i can go

BMRDude 04-23-2019 06:30 PM

you have to determine how much boost your car can handle. Every car is unique.
Your starting point is your Map 2 log. from this log you can see what your car did at each rpm and try adding 1 or 2 psi and then do more runs to see how the logs look and how the car performs.

it is trial and error but don't get too aggressive. go one step at a time.
you will need to learn how to read your logs. this takes time and practice. it is not simply plug and play.

In particular, you need to know how to read the timing, afr, throttle, trims, and make a judgement about how stressed your engine is vs how hard you are willing to push it.

This N63 engine has proven to be more difficult so many decide to play it safe and stick with Map 2.

535_BiTurbo 06-19-2019 07:47 AM

why are there large boost differences between banks on Map 2?


All times are GMT -7. The time now is 07:37 PM.


Copyright 2007 - 2019, N54tech.com