N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   VW/Audi Group (https://www.n54tech.com/forums/forumdisplay.php?f=17)
-   -   Open-loop operation with JB4 (https://www.n54tech.com/forums/showthread.php?t=58082)

Yoshimura 05-19-2019 11:02 PM

Open-loop operation with JB4
 
How the ECU can properly calculate the fuel requirement in open-loop (when using the MAP sensor) if the the MAP sensors values are spoofed (and are thus not the actual values)? :shrug

George @ BMS 05-21-2019 10:12 AM

The AFR tables are load based. At a certain rpm pre max boost its on the max in the chart regardless so going higher with boost does not necessarily mean the ECU will run richer. The newer ECU's also look at exhaust gas temperature so it can adjust AFR far richer than the primary tables to keep the cylinder temperatures at bay. The newer ECU's have evolved quite a bit allowing piggy back use to be far more efficient than in the past.


All times are GMT -7. The time now is 09:33 PM.


Copyright 2007 - 2018, N54tech.com