N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   N54 (https://www.n54tech.com/forums/forumdisplay.php?f=3)
-   -   New to JB4 (https://www.n54tech.com/forums/showthread.php?t=19920)

N54Boost 05-30-2013 10:48 AM

New to JB4
Ok, so ill admit im rather new to the JB4. So before i install it, i have a few questions. Should i install the ********* DP first then the JB4 or does it even matter? Also once the JB4 is installed, ill need to hook it up to my laptop to download the latest firmware correct? And would you guys/girls recommend me snipin the diodes now before i install?

i know im a NOOB :rolleyes2 but id greatly appreciate the advice

thanks guys

v8bait 05-30-2013 11:04 AM

Doesn't matter, all roads lead to the same outcome. If it was my first time I'd probably install it the way I got it to make sure it works after wired in including laptop communication, and before I put everything back together pull the cover off, snip snip, and upload firmware. You can put the dp's on whenever you feel like it, I had to reset adaptations afterwards so probably after the jb4 is best.

bmsportzn135i 05-30-2013 11:09 AM

I would snip, then just plug and play! Set it too map 5, do a couple of 3-4 full throttle runs (ie "wot") and then enjoy!

N54Boost 05-30-2013 11:17 AM

Hey guys i really appreciate the response, Thanks Alot

scotte30m3 05-30-2013 12:30 PM

Along the Lines of the DP... Are there specific setting that need to be changed after the *** are installed to eliminate the rear O2 sensors?

All times are GMT -7. The time now is 10:37 PM.

Copyright 2007 - 2020, N54tech.com