N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   N54 (https://www.n54tech.com/forums/forumdisplay.php?f=3)
-   -   Plans for integrating JB4 with MHD flex fuel? (https://www.n54tech.com/forums/showthread.php?t=54965)

joeinsd 04-17-2020 08:46 AM

Quote:

Originally Posted by joeinsd (Post )
Motiv Flex module installed. FF map from Trebila received and flashed via MHD.

Now, is this the ONLY setting to turn on in JB4 the DTML FlexFuel Input option?

Do any of the other inputs need to be turned on as well, such as the 14/15/16 input?

Wanted to confirm since no one had answered. Also because e content sometimes is pegged at 100 when DTML is on.. Thanks!

fn42 04-19-2020 04:58 AM

Quote:

Originally Posted by joeinsd (Post )
Wanted to confirm since no one had answered. Also because e content sometimes is pegged at 100 when DTML is on.. Thanks!

Make sure you are running at least G5_ISO_32_14_T11 FW

Quote:

T11) Fixed issue with E85 reading not showing properly when using MHD back end flash flex fuel integration, enabled on WMI page bit2 on for DTML Flex Input.
mine didnt read correctly until I flashed it

joeinsd 04-19-2020 08:55 PM

1 Attachment(s)
Thanks for chiming in fn42.

I'm running 32.14.T11. Today I had both bits turned on and it showed content, but fluctuates with throttle.. That's not normal, is it?

https://youtu.be/cLhOERxlCLQ


All times are GMT -7. The time now is 05:43 PM.


Copyright 2007 - 2020, N54tech.com