N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   MINI Cooper N18, B48 (https://www.n54tech.com/forums/forumdisplay.php?f=43)
-   -   P0171 code after installing BMS intake (https://www.n54tech.com/forums/showthread.php?t=59450)

Romel26 09-07-2019 06:55 AM

P0171 code after installing BMS intake
 
I got the P0171 code after installing ths BMS intake, is there anyway to solve this problem?

It's a mini cooper B38 2015

Thanks in advance

Terry @ BMS 09-07-2019 11:25 AM

I think that is just a harmless MAF plausibility fault. Could try adjusting the MAF around a bit with washers or one side or the other to change the angle and see if that helps.

Tworons 09-08-2019 10:29 PM

I wouldn't run this code for long...Had it on a previous car, and although it did not affect performance, it played with fuel trims and lean conditions at the end.
Keep an eye on the LTFT and try to fix it.


All times are GMT -7. The time now is 07:04 PM.


Copyright 2007 - 2020, N54tech.com