N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   Support & Log Review (https://www.n54tech.com/forums/forumdisplay.php?f=44)
-   -   New JB4 installation - Log Review - Map 4 error (https://www.n54tech.com/forums/showthread.php?t=59170)

RobbieSan 08-12-2019 10:16 AM

New JB4 installation - Log Review - Map 4 error
 
1 Attachment(s)
Updated log: 14.08.2019

Hi,

I have been having this problem that the JB4 switches (only sometimes) under WOT or 80% WOT to map 4.

It flashed 2 times the hazard lights. It has changed twice to map 4 without flashing the hazard lights.

The log was with map 5 and it did not swap to map 4 this time.

Could somebody help me decipher this log? Is there anything dangerous happening?

Mods:
JB4 - map 5
BEF
102 Aral fuel (Europe)
1 step colder plugs [NGK (ILZKBR7B8DG / 95770)]
k&n replacement oem air filter


Thanks a lot!

Dave @ BMS/Fuel-It! 08-12-2019 01:16 PM

Can you just upload the CSV- we don’t use 3rd party host sites- thanks!

RobbieSan 08-12-2019 02:57 PM

Perfect, thanks for the infos.
Will do it, but today we have rain rain rain :crazy:

Dave @ BMS/Fuel-It! 08-12-2019 06:13 PM

Logs are a bit short.
Enable 6cyl logging
Proper logs are 2k to redline in 3rd WOT w traction off.

RobbieSan 08-14-2019 10:51 AM

Updated log is up

Thanks in advance!

Dave @ BMS/Fuel-It! 08-15-2019 11:18 AM

Log doesn’t look bad- typical for a map 5 log.

You occasionally switch to map 4, based on safety 1 = overboost

RobbieSan 08-16-2019 12:42 AM

Thanks a lot Dave!

Dave @ BMS/Fuel-It! 08-16-2019 12:43 PM

Quote:

Originally Posted by RobbieSan (Post )
Thanks a lot Dave!

Anytime! Enjoy the weekend:)


All times are GMT -7. The time now is 04:41 PM.


Copyright 2007 - 2020, N54tech.com