N54Tech.com - International Turbo Racing Discussion

N54Tech.com - International Turbo Racing Discussion (https://www.n54tech.com/forums/index.php)
-   N54 (https://www.n54tech.com/forums/forumdisplay.php?f=3)
-   -   Plans for integrating JB4 with MHD flex fuel? (https://www.n54tech.com/forums/showthread.php?t=54965)

Milan 09-10-2018 09:00 AM

Plans for integrating JB4 with MHD flex fuel?
 
Terry-

What are the plans for integrating MHD's flex fuel release with the JB4? I was thinking we could keep the JB4 controlling boost and PI as is but maybe make use of some timing and fuel scalars.

Perhaps you guys are already working on development?

Payam @ BMS 09-10-2018 09:09 AM

IIRC He's working on it.

Six Pot 09-10-2018 11:32 AM

Had the same convo with Terry. As cool as this is I am moving to 100% E85 which invalidates the need. Side note I have the Module and the Short line kit for sale for those who are looking to go that route :-)

Terry @ BMS 09-10-2018 07:21 PM

Yes we're working on incorporating a few of the new table blends in to our bef.

Riceball777 09-10-2018 09:09 PM

I would love for this to happen.

mattgu40 09-11-2018 06:25 AM

JB4 adaptation for Motiv flexfuel ECS as well as backend flash compatibility would be awesome

Terry @ BMS 09-12-2018 08:21 AM

We have one of the MHD adapters coming for Payam's car and we'll use that to develop the new MHD E85 compatible JB4 BEF maps on site. :)

veer90 09-13-2018 09:25 AM

Is there any ballpark timeline for release? Not to rush or anything I'm perfectly fine without flex fuel. Deciding whether to sell my flex fuel kit or not.

Thanks

Terry @ BMS 09-13-2018 09:52 AM

I can't imagine more than a few weeks? The JB4 already integrates PI volume on ethanol flow so what we're looking to do with the new tables is incorporate timing and fuel trims, and then reconfigure the JB4 map to also scale boost, for a fully integrated easy to use setup that adapts to any mixture.

GreyNblueE92 10-24-2018 08:27 AM

Would flashing a mhd flex fuel map then using the jb4 for boost control only work? I think option 4/4

Terry @ BMS 10-24-2018 08:41 AM

No but we can provide a JB4 BEF map compatible with the MHD flex fuel sensor, just need more cars running the setup to work on it. So email me once you have their sensor setup installed. :)

5nowh1te 12-09-2018 04:42 PM

Quote:

Originally Posted by Terry @ BMS (Post )
No but we can provide a JB4 BEF map compatible with the MHD flex fuel sensor, just need more cars running the setup to work on it. So email me once you have their sensor setup installed. :)

I am having this sensor installed soon along with upgraded turbos, I need your help lol , more info on the other post I responded to.

Terry @ BMS 12-09-2018 04:48 PM

We will post jb4 maps for it next week hopefully

Milan 12-09-2018 10:41 PM

Quote:

Originally Posted by Terry @ BMS (Post )
We will post jb4 maps for it next week hopefully

Sweet! Can you comment on what I need to buy? Just the normal Motiv flex fuel stuff or are you gonna have a BMS kit or what?

Terry @ BMS 12-10-2018 09:48 AM

They sent us one of their kits to play with, so we'll evaluate that all as we go. What flex fuel sensor are you using currently?

Milan 12-11-2018 04:38 PM

Quote:

Originally Posted by Terry @ BMS (Post )
They sent us one of their kits to play with, so we'll evaluate that all as we go. What flex fuel sensor are you using currently?

I don't have anything, I was waiting for you guys to choose a direction, haha

Terry @ BMS 12-11-2018 05:01 PM

Got it! The plan is to use Fuel-IT's kit without their analyzer, and then the Motiv analyzer kit, which plugs in to the ECU. The JB4 side reads the E85 mix off the ECU, and in conjunction with a Motiv E85 specific flex fuel BEF map, does the tuning. Little projects keep popping up but we've got the stuff ready to go on Payam's 335 to make an install guide, etc.

Milan 12-11-2018 11:35 PM

Quote:

Originally Posted by Terry @ BMS (Post )
Got it! The plan is to use Fuel-IT's kit without their analyzer, and then the Motiv analyzer kit, which plugs in to the ECU. The JB4 side reads the E85 mix off the ECU, and in conjunction with a Motiv E85 specific flex fuel BEF map, does the tuning. Little projects keep popping up but we've got the stuff ready to go on Payam's 335 to make an install guide, etc.

Do you think you will put together a combo kit for sale in the future?

trebila 12-12-2018 09:30 AM

Quote:

Originally Posted by Terry @ BMS (Post )
Got it! The plan is to use Fuel-IT's kit without their analyzer, and then the Motiv analyzer kit, which plugs in to the ECU. The JB4 side reads the E85 mix off the ECU, and in conjunction with a Motiv E85 specific flex fuel BEF map, does the tuning. Little projects keep popping up but we've got the stuff ready to go on Payam's 335 to make an install guide, etc.

Great news, having customers waiting for the complete jb4 integration with the MHD/Motiv flex fuel kit. ;)

Terry @ BMS 12-12-2018 09:34 AM

Quote:

Originally Posted by Milan (Post )
Do you think you will put together a combo kit for sale in the future?

I have to spend some more time with it but maybe.

mattgu40 12-12-2018 11:54 PM

Quote:

Originally Posted by trebila (Post )
Great news, having customers waiting for the complete jb4 integration with the MHD/Motiv flex fuel kit. ;)

yep

5nowh1te 12-14-2018 10:15 PM

Quote:

Originally Posted by Terry @ BMS (Post )
Got it! The plan is to use Fuel-IT's kit without their analyzer, and then the Motiv analyzer kit, which plugs in to the ECU. The JB4 side reads the E85 mix off the ECU, and in conjunction with a Motiv E85 specific flex fuel BEF map, does the tuning. Little projects keep popping up but we've got the stuff ready to go on Payam's 335 to make an install guide, etc.

exact setup I purchased, I got the flex fuel with upgraded lines and Motiv flex fuel box, lmk when those maps are ready Terry, Thanks.

mattgu40 01-03-2019 12:19 PM

Quote:

Originally Posted by Terry @ BMS (Post )
I have to spend some more time with it but maybe.

Sensor is plumbed.

Awaiting instructions for wiring..

Meth port injection bms controller
Jb4 custom tune @trebula
Gc turbo

Terry @ BMS 01-03-2019 01:02 PM

I have the maps ready, just need a quick test on our 335.

In the mean time the sensor itself installs per Motiv's directions for now.

Payam @ BMS 01-03-2019 02:20 PM

Quote:

Originally Posted by Terry @ BMS (Post )
I have the maps ready, just need a quick test on our 335.

In the mean time the sensor itself installs per Motiv's directions for now.

Bumper just arrived today. Now I have everything to fix the car. I'll put it together this weekend and bring it by for you sir!

Sorry guys, I'm the hold up :(


All times are GMT -7. The time now is 10:47 PM.


Copyright 2007 - 2020, N54tech.com