Had the SES light up on me this morning. Oddly it came on at the exact same time the low fuel indicator popped up, so I'm not sure what's related to what. I just went ahead and cleared it and won't worry about it unless it comes back...
Last edited by DieselGeek; 01-21-2011 at 03:44 PM..
Okay, SES is back, P323F, anybody know what that is? Turned my JBD down to zero and cleared the codes, just want to prove it's not a car issue before proceeding with finding the upper limit of what I can set the JBD to (my car had some odd codes pop up when almost new, seems to do that on it's own, so I want to rule it out first).
Insanely perfect driving weather here in California, had the pleasure during lunch of jumping on the throttle while rolling in a straight line at 20MPH and having the rear end wiggle and traction control fight the JBD for control of the rear wheels through 2nd gear :-D
Okay, got the SES to light up again, strange as it was again just about as the low-fuel alarm came on. The SES went out after refueling and before I got a chance to check the car, but the code appears to still be here. ODB2 scanner says P323F, and the BT software reads 4674 and 4862 fault codes. No shadow codes are present. Thoughts?
Terry, no, didn't get that code stock, this only started since I put the JBD in (my point about the car being generally code'ie was back several thousand miles when it was new. I haven't had a SES for 5000 miles at least before putting the JBD in). Any idea what the code is? You have many 2011MY cars with JBD on them yet?
2011 335d M-Sport + JBD = Awesomesauce
Last edited by DieselGeek; 02-01-2011 at 10:32 PM..
SES came on again yesterday, two more codes, 4862 and 4D35. Turning the box down to 0%. Would really appreciate understanding what these codes are if anyone can help with that. Is it possible the 2011 cars have an issue with the JBD?
Lots of 2011s in use without issue. If you're getting difference codes each time I doubt it's related to tuning as I haven't seen the above codes before. But I don't have a full code listing yet. I'll check with BT to see if that is ready. Next step for you would be to remove all together, clear codes, and see what comes back.