N54Tech.com - Your Source for International Turbo BMW Racing Discussion
(#126)
Old
Mrpink Mrpink is offline
Junior Member
 
Posts: 83
Join Date: Dec 2016
Car: M140i
Default 07-23-2017, 01:44 AM

Doesn't look like the B58 charge pipe?

Sounds like you have a fault if it won't prime, as it works for me, and all the others I know who fitted.

Use something like this for the fuel, makes it easier and get no spills,

https://www.ebay.co.uk/itm/251885553278
Reply With Quote
(#127)
Old
RMM RMM is offline
Junior Member
 
Posts: 54
Join Date: Apr 2017
Car: 120i
Default 07-23-2017, 10:02 AM

thanks for the tip, that is a B48 charge pipe with single CM7 nozzle, how do you prime it, you just press the button in the BT APP and it squirts?

95% denatured alcohol is about 1.3 -1.4 USD / L here at the local pharmacy actually is good deal I think I will run it unless someone tells me not to, actually washer fluid is more costly at 1 USD for 50%, so it turns out to be 2 USD / l for meth in the washer fluid....

I just posted logs in support forum it looks to be working well timing for example is much improved peaks at 21 PSI and hold onto 19 . Very similar to B58, as that is all I have to go on as nobody else really posting anything for B48 on meth, however I assume they are pretty similar minus 2 cylinders, why didn't I get the 140i you ask, it cost 25k USD more here....
Reply With Quote
(#128)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 22,102
Join Date: Jan 2008
Default 07-23-2017, 10:19 AM

If you need tech support use the support forum, or email in if needed!

Must have meth map map7 selected before the prime button in the interface will work.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#129)
Old
RMM RMM is offline
Junior Member
 
Posts: 54
Join Date: Apr 2017
Car: 120i
Default 07-23-2017, 07:42 PM

Yup that was it, I didn't start to tune yet so I was still on my original map, thanks.

I played with the boost safety function by max out signal scale it works really well immediate and obvious and gives you a gauge swipe when activates, very cool.
Reply With Quote
(#130)
Old
Wickedowesix's Avatar
Wickedowesix Wickedowesix is offline
Junior Member
 
Posts: 80
Join Date: Apr 2017
Car: 540i G30
Default 07-31-2017, 11:54 AM

Where did everyone tap in the FSB 12+ power wire from? Looking to see which wire you guys used (B58 cars)
Reply With Quote
(#131)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 22,102
Join Date: Jan 2008
Default 07-31-2017, 12:45 PM

It goes in the fuse box per the WMI installation guide.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#132)
Old
Mrpink Mrpink is offline
Junior Member
 
Posts: 83
Join Date: Dec 2016
Car: M140i
Default 07-31-2017, 10:31 PM

Quote:
Originally Posted by Wickedowesix
Where did everyone tap in the FSB 12+ power wire from? Looking to see which wire you guys used (B58 cars)
I connected it to the main power on the LHS. It's protected by the fuse at the end of the day. Works perfectly, and convenient as I have mounted the fsb next to the JB4
Reply With Quote
(#133)
Old
RMM RMM is offline
Junior Member
 
Posts: 54
Join Date: Apr 2017
Car: 120i
Default 08-01-2017, 11:07 PM

http://www.n54tech.com/forums/attach...1&d=1501653913

this should be same as guide but wire is a bit update I think more clear
Attached Images
 
Reply With Quote
(#134)
Old
Snirre77's Avatar
Snirre77 Snirre77 is offline
New Member
 
Posts: 8
Join Date: Aug 2017
Car: Bmw M140i
Default 10-09-2017, 01:49 AM

Hi just whant to know have anyone had errors regarding mix to rich with wmi
Reply With Quote
(#135)
Old
BazBar's Avatar
BazBar BazBar is offline
Junior Member
 
Posts: 187
Join Date: Feb 2011
Car: UK 140i-M Sport Auto
Default 10-12-2017, 05:05 AM

Quote:
Originally Posted by Snirre77
Hi just whant to know have anyone had errors regarding mix to rich with wmi
Yup, i also get the error message, i have dual 7 nozzles.
I also get it when i run the car on map 4, with the car in Eco Mode...
Reply With Quote
(#136)
Old
Snirre77's Avatar
Snirre77 Snirre77 is offline
New Member
 
Posts: 8
Join Date: Aug 2017
Car: Bmw M140i
Default 10-12-2017, 08:24 AM

I also have deul cm7 nozzles but mine happened in map7 with 100% meth
Reply With Quote
(#137)
Old
BazBar's Avatar
BazBar BazBar is offline
Junior Member
 
Posts: 187
Join Date: Feb 2011
Car: UK 140i-M Sport Auto
Default 10-12-2017, 09:10 AM

Quote:
Originally Posted by Snirre77
I also have deul cm7 nozzles but mine happened in map7 with 100% meth
Yes, i get it in Map 7 just after some vigorous driving, and i also get it in map 4 eco mode when driving in traffic ?....Strange
Reply With Quote
(#138)
Old
Snirre77's Avatar
Snirre77 Snirre77 is offline
New Member
 
Posts: 8
Join Date: Aug 2017
Car: Bmw M140i
Default 10-12-2017, 11:41 AM

Quote:
Originally Posted by BazBar
Yes, i get it in Map 7 just after some vigorous driving, and i also get it in map 4 eco mode when driving in traffic ?....Strange
Will try to lean out with some ethanol in the thank. Hope it works
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2017, N54tech.com