N54Tech.com - Your Source for International Turbo BMW Racing Discussion
(#1)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 25,051
Join Date: Jan 2008
Default Just another 1000whp M5 - 01-26-2018, 06:28 PM

For those that missed it, Ram managed to break the 1000whp barrier with his M5 this morning. Setup is custom Pure turbo kit, built motor, WMI, BMS intake, and various other mods. Tuning done using our new JB4 S63TU V2 system (with twin bank boost control), back end flash mapping (Ram can fill in who the tuner was there I can't recall), and various other minor modifications.

Ran in to DCT clutch spin as the turbos have a lot more in them. But power band is amazing. Definitely 180mph+ traps coming to a runway near you soon.

Log below was from a 980whp run, IIRC. I believe he had to lower the boost to reduce slippage and get power over 1000whp.
Attached Images
   


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#2)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is online now
Super Moderator
 
Posts: 3,581
Join Date: Oct 2013
Car: e90 335i
Default 01-26-2018, 07:28 PM

Congrats Ram!! Holy moly, is that 17*?


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#3)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 25,051
Join Date: Jan 2008
Default 01-26-2018, 08:35 PM

He's running more timing than I'd suggest but then again I don't know the final CR... Once the clutches are beefed up he'll need to do some MBT dyno testing with it.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#4)
Old
135idct 135idct is offline
Junior Member
 
Posts: 402
Join Date: May 2012
Default 01-26-2018, 09:01 PM

from the log, too much lag.

pump gas 93 dyno sheet?
Reply With Quote
(#5)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 25,051
Join Date: Jan 2008
Default 01-26-2018, 09:03 PM

Spool is good for large turbos. Feels responsive on the road as it moves even at 10psi. This car will probably never see 93 octane, lol.


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#6)
Old
allmotor_2000 allmotor_2000 is offline
Junior Member
 
Posts: 296
Join Date: Jul 2014
Car: 2014 F10 M5 CP Frozen Grey
Default 01-26-2018, 09:44 PM

I have various timing maps - this was +2 degrees over stock (which is 15* assuming no knock/retard). Compression is lowered 0.5 so should be fine with the appropriate octane.

Backend flash was from DMETUNING and Kevin @ Precision. So far all the extra mods arnt in yet. Still have exhaust, ice tank etc. to install.

The dual bank WG control works amazing - thx Terry and BMS
Reply With Quote
(#7)
Old
allmotor_2000 allmotor_2000 is offline
Junior Member
 
Posts: 296
Join Date: Jul 2014
Car: 2014 F10 M5 CP Frozen Grey
Default 01-26-2018, 10:15 PM

https://youtu.be/lpCHB4qvKSY

Reply With Quote
(#8)
Old
steeve13m steeve13m is online now
Junior Member
 
Posts: 296
Join Date: Apr 2016
Car: 13 M5 DCT
Default 01-29-2018, 01:44 PM

they are cropping up....I think there's 3 M5's now with 1000whp+ ?


2013 F10 M5 -DCT- Montecarlo Pearl Blue- BBMR 800 Stage 1 Twin Turbo system 700whp+ on 93 octane, BBMR D.P./Exhaust, Intake, HRE FF01, AC Schnitzer springs,Lucas Octane Booster, 5% 3M Window tints,Clear protection film,LED interior bulbs,Blinder M27,Escort Passport MAX,12" Sub+Amp,Sprint Booster.

2004 Lamborghini Gallardo -Manual- Giallo Midas Pearl Yellow- Modified Intake, Exhaust, Tuning, Carbon parts, HRE wheels, Sound system, +
Reply With Quote
(#9)
Old
allmotor_2000 allmotor_2000 is offline
Junior Member
 
Posts: 296
Join Date: Jul 2014
Car: 2014 F10 M5 CP Frozen Grey
Default 01-29-2018, 03:14 PM

There are two... since requirements for this power level are:

1. Built motor
2. Custom Turbos (stock housings will not cut it..)
Reply With Quote
(#10)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 25,051
Join Date: Jan 2008
Default 01-29-2018, 03:27 PM

Quote:
Originally Posted by allmotor_2000
There are two... since requirements for this power level are:

1. Built motor
2. Custom Turbos (stock housings will not cut it..)
Will this void my warranty?


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#11)
Old
allmotor_2000 allmotor_2000 is offline
Junior Member
 
Posts: 296
Join Date: Jul 2014
Car: 2014 F10 M5 CP Frozen Grey
Default 01-29-2018, 04:05 PM

Dealer did my oil change and fixed my sunroof... ��
Reply With Quote
(#12)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is online now
Super Moderator
 
Posts: 3,581
Join Date: Oct 2013
Car: e90 335i
Default 01-29-2018, 04:44 PM

Quote:
Originally Posted by Terry @ BMS
Will this void my warranty?
Not if you clear the codes and pull the Jb4 off right?? Hahaha


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#13)
Old
Nanometer Nanometer is online now
Senior Member
 
Posts: 509
Join Date: Jan 2014
Car: 335i, 2009
Default 01-29-2018, 05:02 PM

30 psi boost and 15 degrees of timing... wow..


335i E90 2009 ///M Sport Auto
Mods: | Wagner Intercooler | MeowPipe | Meth-Trunk | JB4 | Pump_Back_End_Flash | Fuel-it! Stage 2
Drivetrain--------ForgeStar F14 Wheels 18" (245 & 275 PS4) | XHP L3 Transmission Flash | Wavetrac LSD
Suspension-------KW V3 Coil Overs| M3 RSF Bushings and Dif Bushings | H&R Sways


X5 50i 2013 ///M Sport
Stock

Reply With Quote
(#14)
Old
allmotor_2000 allmotor_2000 is offline
Junior Member
 
Posts: 296
Join Date: Jul 2014
Car: 2014 F10 M5 CP Frozen Grey
Default 01-29-2018, 05:58 PM

Quote:
Originally Posted by Nanometer
30 psi boost and 15 degrees of timing... wow..
Beauty of octane and direct injection... doesn't appear to knock, but may dial it back for some safety margin
Reply With Quote
(#15)
Old
Ando @ BMS's Avatar
Ando @ BMS Ando @ BMS is online now
BMS Customer Service
 
Posts: 696
Join Date: Jan 2013
Car: bmw 335i
Default 01-30-2018, 01:07 PM

:Can't wait to see this car at 1/4 and 1/2 mile.
Mostly so I see other people reaction


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

Last edited by Ando @ BMS; 01-30-2018 at 02:00 PM..
Reply With Quote
(#16)
Old
steeve13m steeve13m is online now
Junior Member
 
Posts: 296
Join Date: Apr 2016
Car: 13 M5 DCT
Default 01-30-2018, 01:23 PM

Quote:
Originally Posted by Ando @ BMS
:Can't wait to see this car at 1/4 and 1/2 mile.
Mostly so I see other people reaction :eek
9.5 1/4 mile guestimate ?


2013 F10 M5 -DCT- Montecarlo Pearl Blue- BBMR 800 Stage 1 Twin Turbo system 700whp+ on 93 octane, BBMR D.P./Exhaust, Intake, HRE FF01, AC Schnitzer springs,Lucas Octane Booster, 5% 3M Window tints,Clear protection film,LED interior bulbs,Blinder M27,Escort Passport MAX,12" Sub+Amp,Sprint Booster.

2004 Lamborghini Gallardo -Manual- Giallo Midas Pearl Yellow- Modified Intake, Exhaust, Tuning, Carbon parts, HRE wheels, Sound system, +
Reply With Quote
(#17)
Old
Ando @ BMS's Avatar
Ando @ BMS Ando @ BMS is online now
BMS Customer Service
 
Posts: 696
Join Date: Jan 2013
Car: bmw 335i
Default 01-30-2018, 02:00 PM

Quote:
Originally Posted by steeve13m
9.5 1/4 mile guestimate ?
Maybe lower


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#18)
Old
allmotor_2000 allmotor_2000 is offline
Junior Member
 
Posts: 296
Join Date: Jul 2014
Car: 2014 F10 M5 CP Frozen Grey
Default 01-30-2018, 02:57 PM

If it hooks 9.2 @ 153

else... somewhere in the 9's

else... something breaks!
Reply With Quote
(#19)
Old
135hoser 135hoser is offline
Junior Member
 
Posts: 43
Join Date: Sep 2011
Default 02-13-2018, 07:11 PM

Quote:
Originally Posted by allmotor_2000
If it hooks 9.2 @ 153

else... somewhere in the 9's

else... something breaks!
Best flow chart ever. I am super excited with this build. I get to live through allmotor_2000 while they build my dream f10 m5.

I can't wait to see some in car footage of you at the strip! :D
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2017, N54tech.com