N54Tech.com - Your Source for International Turbo BMW Racing Discussion
(#1)
Old
Sean0 Sean0 is offline
New Member
 
Posts: 2
Join Date: Sep 2014
Car: Mustang06
Default Cheap Labor for Bolt Ons in Houston ,TX - 09-10-2014, 10:40 AM

Hi my names Sean. I'm not active on the BMW forums but I'm pretty active on my E90 Houston FB group . I've done installs for few members here on n54 tech as well that found me on the fb group page. They can chime in to attest to the quality work I do. I truly will treat your car as if it were my own . I'm not a shop but I'm pretty mechanically inclined. I have installed over 20+sets of ********* on both the n54/n55. Knocked it out in under 3 hours multiple times. It's a PITA but I've become pretty decent at it lol .. I also will be installing a custom single turbo kit soon for a member here and I'm excited to see what kind of power it can put down!

Below are prices for what I charge for labor only :

Intercoolers : $90

Down *****: $ 185

Spark Plugs $40

Charge Pipe $40

Lower Springs $240

Coil Overs $340

LPFP upgrade $160 ( you Supply the 255 walbro kit from Steve) I WILL ONLY INSTALL HIS KITS
Reply With Quote
(#2)
Old
Sean0 Sean0 is offline
New Member
 
Posts: 2
Join Date: Sep 2014
Car: Mustang06
Default 09-10-2014, 10:47 AM

Contact info 832 33zero 898six . Send me a text or call me . Don't forget to mention your from n54 tech so I know who you are
Reply With Quote
(#3)
Old
Ddang06 Ddang06 is offline
Junior Member
 
Posts: 120
Join Date: Nov 2012
Car: 335i coupe 6MT
Default 09-11-2014, 02:46 PM

Sean does great work . He installed my *** with no issues , and took them off too when I needed to take it my car to the stealership for warranty work . He helps a lot of people in our local BMW group in Houston.
Reply With Quote
(#4)
Old
joshdogg0404 joshdogg0404 is offline
New Member
 
Posts: 1
Join Date: Sep 2014
Car: bmw 335i
Default 09-18-2014, 05:57 PM

I can personally vouch for Sean. I never met him in person until it was time for my installs but when meeting him he treated me like we knew each other for a few years. The guy is awesome at what he does and doesn't take any short cuts. I had him do my down pipe, fmic, intake, and jb4 install on my n55 e92. I couldn't of been happier with the work. My car went from running around a 14.30ish 1/4 mile to a 12.7 after Sean was done with it. He's your guy to go with and you can't beat his prices anywhere unless you do the work yourself.
Reply With Quote
(#5)
Old
kddao kddao is offline
New Member
 
Posts: 4
Join Date: Aug 2014
Car: 10' e92
Default 09-18-2014, 06:36 PM

What can I say, this guys got the hots for me but sure know his stuff. Worked on my e92 n54 and my Stang. Very knowledgeable and detail with his work, torques every bolt down to spec and checks everything around it. Easy and cool guy to work with!
Reply With Quote
(#6)
Old
7u8i9o0paaron 7u8i9o0paaron is offline
New Member
 
Posts: 1
Join Date: Sep 2014
Car: E90
Default 09-18-2014, 09:26 PM

I just want to say thank you to Sean, he drove to my home and help me to replace the spark plugs, he knows his thing, will recommend him for sure!!
Reply With Quote
(#7)
Old
LAZ LAZ is offline
Junior Member
 
Posts: 142
Join Date: May 2013
Car: 135i
Default 09-19-2014, 09:41 AM

Fairly new "Euro/BMW" group in Houston....Facebook.com/groups/EuroticOfHouston


JB4 G5//BMS DCI//BMS 3" CATELESS **//BMS Meth Kit//BMS Backend E85 Flash//Alpina B3 Flash//
Walbro 455lpfp//Yokohama SDrive//BMS SLD//N55 Midpipes//Vibrant Performance Resonators
Reply With Quote
(#8)
Old
n54houston n54houston is offline
New Member
 
Posts: 3
Join Date: Dec 2013
Car: 2007 bmw 335i
Default 09-20-2014, 08:45 PM

Sean is a great guy and knows what he is doing. Helped me find a boost leak which limited my boost output to 10psi, soon after I was hitting 17+ with e85.
Reply With Quote
(#9)
Old
Ddang06 Ddang06 is offline
Junior Member
 
Posts: 120
Join Date: Nov 2012
Car: 335i coupe 6MT
Default 12-06-2014, 07:35 PM

More credentials can be verified by joining the local bimmerboosthouston fb group .
Reply With Quote
(#10)
Old
Ddang06 Ddang06 is offline
Junior Member
 
Posts: 120
Join Date: Nov 2012
Car: 335i coupe 6MT
Default 12-17-2014, 02:14 PM

Sean just did my walnut blasting this past Sunday for $200. Immediately noticed much faster throttle response , and smoother idling . Valves were super nasty before cleaning .
Reply With Quote
(#11)
Old
v8killr4u v8killr4u is offline
Junior Member
 
Posts: 80
Join Date: Oct 2014
Car: 335 xi
Default 12-17-2014, 08:31 PM

Dam wish someone was in the Detroit area like this...
Reply With Quote
(#12)
Old
135iTaro 135iTaro is offline
New Member
 
Posts: 12
Join Date: Dec 2015
Car: 135i
Default 12-15-2015, 10:14 PM

I will be in contact! Have you installed that single turbo kit yet @sean0
Reply With Quote
(#13)
Old
hooolala hooolala is offline
New Member
 
Posts: 7
Join Date: Oct 2014
Car: BMW F10 550i
Default 08-09-2016, 06:11 PM

Do you work on e89 z4?
Reply With Quote
(#14)
Old
Ddang06 Ddang06 is offline
Junior Member
 
Posts: 120
Join Date: Nov 2012
Car: 335i coupe 6MT
Default 08-10-2016, 08:16 AM

Quote:
Originally Posted by 135iTaro
I will be in contact! Have you installed that single turbo kit yet @sean0

Hey guys , Sean doesn't frequent the forums as much . But I'm his buddy . He recently did a AD engineering single turbo kit . He has a Facebook page raccoon performance . Y'all can check out his installs on that page .
Reply With Quote
(#15)
Old
Ddang06 Ddang06 is offline
Junior Member
 
Posts: 120
Join Date: Nov 2012
Car: 335i coupe 6MT
Default 08-10-2016, 08:17 AM

Quote:
Originally Posted by hooolala
Do you work on e89 z4?
He sure does . Any n54s really.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2017, N54tech.com