N54Tech.com - Your Source for International Turbo BMW Racing Discussion
(#101)
Old
Bimmer_Boost's Avatar
Bimmer_Boost Bimmer_Boost is offline
Legend
 
Posts: 1,029
Join Date: Oct 2014
Car: 2011 e92 335i
Default 02-20-2018, 01:04 PM

Quote:
Originally Posted by luchocamp
The car now at 17psi aprox is as fast as 2017 with oem manifold and PS2 max out 24psi.
Don't want to take away from your great results but I trapped 125 mph on 20 psi (10 degrees of timing) and 120 mph on 16 - 17 psi (average timing of 10 degrees) with the PS2. Your timing is higher than most people run so it isn't fair to compare power at the same boost level. I completely understand that the Speedtech kit is less restrictive and will make more power. I also understand that the xDrive system will add more drivetrain loss compared to my RWD.


2011 E92 335i Auto
12.0 @ 125MPH JB4
12.6 @ 112MPH 92 Octane | 11.8 @ 120MPH E30 MHD
Custom MHD Tune | XHP Stage 3 | ER Chargepipe | VRSF 7in Intercooler | Methanol Injection | Performance Line D-P | Pure Inlet | Pure Stage 2 | Go Fast Bits DV+ |

2014 E84 X1 35i - Stock For now 13.9 @ 99MPH 293 AWHP 305 AWTQ
Reply With Quote
(#102)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 02-20-2018, 02:52 PM

Quote:
Originally Posted by Bimmer_Boost
Don't want to take away from your great results but I trapped 125 mph on 20 psi (10 degrees of timing) and 120 mph on 16 - 17 psi (average timing of 10 degrees) with the PS2. Your timing is higher than most people run so it isn't fair to compare power at the same boost level. I completely understand that the Speedtech kit is less restrictive and will make more power. I also understand that the xDrive system will add more drivetrain loss compared to my RWD.
Just keep watching .... I will upload dyno comparisson soon. Same car, same fuel, same dyno. Only manifold/turbo difference.


'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡

Last edited by luchocamp; 02-20-2018 at 03:24 PM..
Reply With Quote
(#103)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 02-22-2018, 05:20 PM

0 to 60mph in 3.39sec sport+ michelin tires. Speedtech stg3 FTW !



'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡
Reply With Quote
(#104)
Old
terryd5150's Avatar
terryd5150 terryd5150 is offline
Junior Member
 
Posts: 119
Join Date: Apr 2015
Car: BMW 335xi
Default 02-22-2018, 08:56 PM

Quote:
Originally Posted by luchocamp
0 to 60mph in 3.39sec sport+ michelin tires. Speedtech stg3 FTW !

Outstanding!
Reply With Quote
(#105)
Old
Bimmer_Boost's Avatar
Bimmer_Boost Bimmer_Boost is offline
Legend
 
Posts: 1,029
Join Date: Oct 2014
Car: 2011 e92 335i
Default 02-22-2018, 10:17 PM

Quote:
Originally Posted by luchocamp
Same car, same fuel, same dyno. Only manifold/turbo difference.
Same timing and same boost would show how much better the turbo performs at that boost level. We all know the Speedtech kit will outperform the PS2 hands down above 20 psi or so. I would like to see how much it outperforms the PS2 at mild boost settings (15-17 psi).

Nice 0-60 time! Can you scroll down on the photo next time so we can see it?


2011 E92 335i Auto
12.0 @ 125MPH JB4
12.6 @ 112MPH 92 Octane | 11.8 @ 120MPH E30 MHD
Custom MHD Tune | XHP Stage 3 | ER Chargepipe | VRSF 7in Intercooler | Methanol Injection | Performance Line D-P | Pure Inlet | Pure Stage 2 | Go Fast Bits DV+ |

2014 E84 X1 35i - Stock For now 13.9 @ 99MPH 293 AWHP 305 AWTQ
Reply With Quote
(#106)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 02-23-2018, 01:25 AM

Quote:
Originally Posted by Bimmer_Boost
Same timing and same boost would show how much better the turbo performs at that boost level. We all know the Speedtech kit will outperform the PS2 hands down above 20 psi or so. I would like to see how much it outperforms the PS2 at mild boost settings (15-17 psi).
Nice 0-60 time! Can you scroll down on the photo next time so we can see it?
About timing and boost.
Please noted my car has same ACF Tune and JB4 IS0 10 #luchojb4
ACF Tune revised for stg3 efr turbo pwg

Speedtech stg 3 is better 10, 12, 15, 17, 19psi, +20psi off course



'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡

Last edited by luchocamp; 02-23-2018 at 06:13 AM..
Reply With Quote
(#107)
Old
jturboawd jturboawd is offline
Senior Member
 
Posts: 576
Join Date: Apr 2014
Car: 135i
Default 02-23-2018, 04:26 AM

I don’t have numbers yet but e50 no meth 17 psi on the speedtech is FAST. I don’t think my car has been this fast before type of fast and I have ran my old ps2 to 26 psi before. Totally different feeling.

Also with the a2w my iat is 2 f above ambient and only gets a few degrees from that during pull, timing super clean.


2012 N55 135I, Speedtech 7670, JB4 + MHD, Fuel-it port injection & stage 3 LPFP, M4 A2W IC, Mfactory LSD, KW V1, Apex EC-7
Reply With Quote
(#108)
Old
Bimmer_Boost's Avatar
Bimmer_Boost Bimmer_Boost is offline
Legend
 
Posts: 1,029
Join Date: Oct 2014
Car: 2011 e92 335i
Default 02-23-2018, 04:12 PM

Quote:
Originally Posted by jturboawd
I donít have numbers yet but e50 no meth 17 psi on the speedtech is FAST. I donít think my car has been this fast before type of fast and I have ran my old ps2 to 26 psi before. Totally different feeling.

Also with the a2w my iat is 2 f above ambient and only gets a few degrees from that during pull, timing super clean.
Very cool! I have ran my PS2 up to 25 psi on 10 degrees of timing and it felt fast for sure. The torque was a little concerning though as it came on quick and down low. I'm excited to follow your results. Keep posting more information as you can.


2011 E92 335i Auto
12.0 @ 125MPH JB4
12.6 @ 112MPH 92 Octane | 11.8 @ 120MPH E30 MHD
Custom MHD Tune | XHP Stage 3 | ER Chargepipe | VRSF 7in Intercooler | Methanol Injection | Performance Line D-P | Pure Inlet | Pure Stage 2 | Go Fast Bits DV+ |

2014 E84 X1 35i - Stock For now 13.9 @ 99MPH 293 AWHP 305 AWTQ
Reply With Quote
(#109)
Old
jturboawd jturboawd is offline
Senior Member
 
Posts: 576
Join Date: Apr 2014
Car: 135i
Default 02-23-2018, 07:05 PM

Will do, out of country for another few weeks. Hope to get up logs soon. She’s already seen 20 but still working on dialing it in.

On spool I’d say it’s 3-400 off ps2 curve with no tuning to pull up the spool. I think it’s perfect as it is. The hybrids have a killer torque spike and while fun it’s hard on parts and traction control. I hope more people go a2w as I’ve been just amazed at the iats


2012 N55 135I, Speedtech 7670, JB4 + MHD, Fuel-it port injection & stage 3 LPFP, M4 A2W IC, Mfactory LSD, KW V1, Apex EC-7
Reply With Quote
(#110)
Old
cnm135i cnm135i is offline
Senior Member
 
Posts: 719
Join Date: Jun 2015
Car: m135i
Default 02-23-2018, 08:17 PM

Oh man I wish you would post the .csv instead of those tiny unreadable screen shots...

How did the whole installation go? Any hiccups?


M135i, PWG, Pure Stg2, WMI, bootmod3 + JB4, Quaife LSD
100-200kph: 7.0sec (93 and meth)
www.youtube.com/user/npharkes
Reply With Quote
(#111)
Old
jturboawd jturboawd is offline
Senior Member
 
Posts: 576
Join Date: Apr 2014
Car: 135i
Default 02-23-2018, 09:56 PM

It’s harder than pure and a little more involved but with Jeff’s instructions and quick question support it was good. Did it all on stands without dropping subframe. Had to cut a wrench lol

I’d recommend dropping subframe but it’s doable either way


2012 N55 135I, Speedtech 7670, JB4 + MHD, Fuel-it port injection & stage 3 LPFP, M4 A2W IC, Mfactory LSD, KW V1, Apex EC-7
Reply With Quote
(#112)
Old
jturboawd jturboawd is offline
Senior Member
 
Posts: 576
Join Date: Apr 2014
Car: 135i
Default 02-23-2018, 09:56 PM

Itís harder than pure and a little more involved but with Jeffís instructions and quick question support it was good. Did it all on stands without dropping subframe. Had to cut a wrench lol

Iíd recommend dropping subframe but itís doable either way

And my e chassis is a tighter fit


2012 N55 135I, Speedtech 7670, JB4 + MHD, Fuel-it port injection & stage 3 LPFP, M4 A2W IC, Mfactory LSD, KW V1, Apex EC-7
Reply With Quote
(#113)
Old
cnm135i cnm135i is offline
Senior Member
 
Posts: 719
Join Date: Jun 2015
Car: m135i
Default 02-23-2018, 10:27 PM

Quote:
Originally Posted by jturboawd
Itís harder than pure and a little more involved but with Jeffís instructions and quick question support it was good. Did it all on stands without dropping subframe. Had to cut a wrench lol

Iíd recommend dropping subframe but itís doable either way

And my e chassis is a tighter fit
Is there an instruction/manual/DIY available?


M135i, PWG, Pure Stg2, WMI, bootmod3 + JB4, Quaife LSD
100-200kph: 7.0sec (93 and meth)
www.youtube.com/user/npharkes
Reply With Quote
(#114)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 02-24-2018, 02:00 AM

Quote:
Originally Posted by jturboawd
I hope more people go a2w as Iíve been just amazed at the iats
I'm using WMI (7+7 jets) 100% meth and car runs great IATs up to 1/2 mile runs +150mph using JB4 controller.
Inclusive better IATs than my friend The Caasd M4 using (5+5+7 jets)


'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡
Reply With Quote
(#115)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 02-24-2018, 02:01 AM

Quote:
Originally Posted by cnm135i
Is there an instruction/manual/DIY available?
Yes instruction/manual came with Speedtech stg 3 kit


'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡
Reply With Quote
(#116)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 02-27-2018, 07:28 AM

best e.t. to date 18.5psi



'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡
Reply With Quote
(#117)
Old
Yoandry Yoandry is offline
Junior Member
 
Posts: 222
Join Date: Jan 2017
Car: 13 f30 335i
Default 02-27-2018, 07:45 AM

Quote:
Originally Posted by luchocamp
I'm using WMI (7+7 jets) 100% meth and car runs great IATs up to 1/2 mile runs +150mph using JB4 controller.
Inclusive better IATs than my friend The Caasd M4 using (5+5+7 jets)
Hey man,
Im getting meth soon for my ps2, whats the best jet size you recommend for one bung? CM10 or CM12


F30 PWG PS2 + WMI + MHD Bef/JB4 + VRSF FBO + N20TMAP. MPPK, MPE, MP-Susp, MP-Brakes, 437M, MP-Lip, MP-Diffuser, MP-Spoiler, MP-Rocker Panel, MP-Sills, MP-Pedals, MP-Grille, MP-Mats, IND Reflector.
Reply With Quote
(#118)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 02-27-2018, 08:29 AM

Quote:
Originally Posted by Yoandry
Hey man,
Im getting meth soon for my ps2, whats the best jet size you recommend for one bung? CM10 or CM12
CM10 is the bigger jet I like to use, personal preference.


'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡
Reply With Quote
(#119)
Old
Bimmer_Boost's Avatar
Bimmer_Boost Bimmer_Boost is offline
Legend
 
Posts: 1,029
Join Date: Oct 2014
Car: 2011 e92 335i
Default 02-27-2018, 12:15 PM

Quote:
Originally Posted by Yoandry
Hey man,
Im getting meth soon for my ps2, whats the best jet size you recommend for one bung? CM10 or CM12
CM10 or dual CM7


2011 E92 335i Auto
12.0 @ 125MPH JB4
12.6 @ 112MPH 92 Octane | 11.8 @ 120MPH E30 MHD
Custom MHD Tune | XHP Stage 3 | ER Chargepipe | VRSF 7in Intercooler | Methanol Injection | Performance Line D-P | Pure Inlet | Pure Stage 2 | Go Fast Bits DV+ |

2014 E84 X1 35i - Stock For now 13.9 @ 99MPH 293 AWHP 305 AWTQ
Reply With Quote
(#120)
Old
Yoandry Yoandry is offline
Junior Member
 
Posts: 222
Join Date: Jan 2017
Car: 13 f30 335i
Default 02-27-2018, 12:50 PM

Quote:
Originally Posted by Bimmer_Boost
CM10 or dual CM7
I only have one bung, so cm10 its. Thanks


F30 PWG PS2 + WMI + MHD Bef/JB4 + VRSF FBO + N20TMAP. MPPK, MPE, MP-Susp, MP-Brakes, 437M, MP-Lip, MP-Diffuser, MP-Spoiler, MP-Rocker Panel, MP-Sills, MP-Pedals, MP-Grille, MP-Mats, IND Reflector.
Reply With Quote
(#121)
Old
Newguy123's Avatar
Newguy123 Newguy123 is offline
Demigod
 
Posts: 1,745
Join Date: May 2014
Car: 12' 135i
Default 02-27-2018, 01:44 PM

you guys have any valid 60-130 data on these kits yet?


12' DCT 135i
#PURETURBOS
#FUELIT
Reply With Quote
(#122)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 02-28-2018, 06:13 AM

Not yet .... 11.37@124mph 18.5psi with dragy is best reference now. Still working with WGP WGDC PID DB


'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡
Reply With Quote
(#123)
Old
luchocamp's Avatar
luchocamp luchocamp is offline
Junior Member
 
Posts: 324
Join Date: Jun 2016
Car: 2013 BMW 335i xdrive M Sport
Default 03-04-2018, 05:24 AM

Better everyday ..... 11.25@124mph
Thanks for Speedtech stg3 , ACF Performance, Bootmod3, BurgerTuning JB4 ISO #luchojb4


'13 BMW 335ix Speedtech stg 3 !
11.26 @124mph, LUCHOJB4, BMS BEF MHD, E85/Reg + meth 19psi ~ Set-up on Drag Track online instagram @luchocampusano ➡
Reply With Quote
(#124)
Old
Bours Bours is online now
Junior Member
 
Posts: 464
Join Date: Jul 2015
Car: 335i x-drive n55 2011
Default 03-04-2018, 08:41 PM

Quote:
Originally Posted by jturboawd
I donít have numbers yet but e50 no meth 17 psi on the speedtech is FAST. I donít think my car has been this fast before type of fast and I have ran my old ps2 to 26 psi before. Totally different feeling.

Also with the a2w my iat is 2 f above ambient and only gets a few degrees from that during pull, timing super clean.

Do you mind comparing the ps2 vs speedtech ??? How does the spool feel and hows the power ?


335i x-drive 2011 e90 n55

ER chargepipe | performance line d.p | 90/10 bms meth kit | K&N drop in | JB4 + MHD pump flash | xhp stage 3 flash | PURE STAGE 2 turbo
Reply With Quote
(#125)
Old
jturboawd jturboawd is offline
Senior Member
 
Posts: 576
Join Date: Apr 2014
Car: 135i
Default 03-05-2018, 02:32 AM

Spools a few hundred behind but fast compared to other singles on the N54 platform. Power is smooth and fast. 15psi speedtech feels like atleast 20 PS2. Logs are super clean.


2012 N55 135I, Speedtech 7670, JB4 + MHD, Fuel-it port injection & stage 3 LPFP, M4 A2W IC, Mfactory LSD, KW V1, Apex EC-7
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2017, N54tech.com