N54Tech.com - Your Source for International Turbo BMW Racing Discussion

N54Tech.com - Your Source for International Turbo BMW Racing Discussion (http://www.n54tech.com/forums/index.php)
-   N54 (http://www.n54tech.com/forums/forumdisplay.php?f=3)
-   -   turbo builds !!! (http://www.n54tech.com/forums/showthread.php?t=51213)

mafia321 01-12-2018 04:38 PM

turbo builds !!!
 
1 Attachment(s)
hey i need help with my turbo stock n54, so i bought billet compressor 42.7/56 mm and 4.5 bore but the shaft wheel axis is smaller than the bore of the billet


https://www.ebay.com/itm/Billet-Turb...IAAOSwWWxY9JNB

Cloud9Blue 01-12-2018 04:47 PM

return it, there is no solution to this

mattgu40 01-13-2018 11:48 PM

Fill the gap with jb weld she will be fine

LessIsMore 01-17-2018 01:05 PM

Quote:

Originally Posted by Cloud9Blue (Post )
return it, there is no solution to this

yes.

Quote:

Originally Posted by mattgu40 (Post )
Fill the gap with jb weld she will be fine

NO.

fredcase 01-17-2018 03:51 PM

Contact seller. And if they don't respond immediately at Christmas, come back here and write a review about thier bad service.

RCB 01-18-2018 07:16 AM

Quote:

Originally Posted by mattgu40 (Post )
Fill the gap with jb weld she will be fine


Ehhhh, I donít know..... I think wrapping the shaft in duct tape till the wheel slips on tight may be better. At least then you know you are keeping the wheel centered. These are presision parts you know.

T_H_O_M_A_S 01-18-2018 07:55 AM

jb weld and ducttape to keep something @ 100.000 rpm in check :D:clap:

JuniorB 01-19-2018 04:42 AM

If you j b weld it, you can redrilled it. All set. I would use the duct tape on the housing when the wheel comes through it.

mattgu40 01-19-2018 07:01 AM

Quote:

Originally Posted by T_H_O_M_A_S (Post )
jb weld and ducttape to keep something @ 100.000 rpm in check :D:clap:

same deal as swaping compressor wheel with any ebay guizmo without vr balancing unit

JuniorB 01-20-2018 07:46 PM

All kidding aside, there are Mamba brand turbo parts all across eBay, honestly it looks like they have upgrade rebuild kits with 9blade turbines and bigger compressors. There was a tread about this company saying they were an Australian company. Really, is anything made over hear as far as turbo parts? Same size wheels with different material dosent add up to much, there are treads on that is also.


All times are GMT -7. The time now is 09:07 AM.


Copyright © 2007 - 2017, N54tech.com